A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä
Deactivation and regeneration of Pt-modified zeolite Beta-Bindzil extrudates in n-hexane hydroisomerization
Tekijät: Vajglova Zuzana, Kumar Narendra, Peurla Markus, Hupa Leena, Semikin Kirill, Sladkovskiy Dmitry A., Murzin Dmitry Yu
Kustantaja: WILEY
Julkaisuvuosi: 2021
Journal: Journal of Chemical Technology and Biotechnology
Tietokannassa oleva lehden nimi: JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY
Lehden akronyymi: J CHEM TECHNOL BIOT
Sivujen määrä: 11
ISSN: 0268-2575
DOI: https://doi.org/10.1002/jctb.6685
Verkko-osoite: https://doi.org/10.1002/jctb.6685
Rinnakkaistallenteen osoite: https://research.utu.fi/converis/portal/detail/Publication/53414236
BACKGROUND The metal-acid bifunctional catalysts are widely used in many industrially significant chemical processes, including hydroisomerization of n-hexane. Deactivation and regeneration of metal-acid bifunctional extrudates was investigated in continuous n-hexane hydroisomerization in a fixed-bed reactor. Four Pt/H-Beta-25 catalysts containing 30% Bindzil binder were prepared with the same composition and controlled metal deposition.RESULTS Different preparation steps led to differences in the mechanical strength, Pt particle size, acidity and strength, metal-to-acid site (c(Pt)/c(AS)) ratio and proximity between two types of active sites. A very slow deactivation and high selectivity to C-6 isomers was obtained when Pt was deposited on H-Beta-25 zeolite.CONCLUSION Initial selectivity to the desired products was correlated with the physicochemical properties of the catalysts. Location of the metal has a larger influence on catalyst deactivation of the bifunctional catalysts rather than the metal-to-acid site ratio or site proximity. Decline of n-hexane conversion and selectivity to C-6 isomers were correlated with changes in the textural properties and acidity of the deactivated catalyst, respectively. (c) 2021 The Authors. Journal of Chemical Technology & Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
Ladattava julkaisu This is an electronic reprint of the original article. |  |
