A4 Vertaisarvioitu artikkeli konferenssijulkaisussa
Design of a Fuzzy Controller for a Hybrid Generation System
Tekijät: Nuñez, J. R.; Mestre, J.; Cabello, J. J.; Dominguez, H.; Fong, J.; Peña, L.; Benítez, I.; Oliveira, D. D.
Toimittaja: Castro Suarez, John R.
Konferenssin vakiintunut nimi: Expotecnología
Kustantaja: Institute of Physics Publishing
Julkaisuvuosi: 2020
Lehti: IOP Conference Series: Materials Science and Engineering
Kokoomateoksen nimi: Expotecnología 2019: “Research, Innovation and Development in Engineering” 30 October - 1 November 2019, Cartagena, Colombia
Tietokannassa oleva lehden nimi: {IOP} Conference Series: Materials Science and Engineering
Artikkelin numero: 012017
Vuosikerta: 844
Numero: 1
ISSN: 1757-8981
eISSN: 1757-899X
DOI: https://doi.org/10.1088/1757-899x/844/1/012017
Julkaisun avoimuus kirjaamishetkellä: Avoimesti saatavilla
Julkaisukanavan avoimuus : Kokonaan avoin julkaisukanava
Verkko-osoite: http://dx.doi.org/10.1088/1757-899x/844/1/012017
Rinnakkaistallenteen osoite: https://research.utu.fi/converis/portal/detail/Publication/505191980
This paper presents the design of a control system for the automatic connection/disconnection and distribution of load, between an asynchronous alternator and a generator, in a hydroelectric central that works in isolated mode. The design of a control algorithm based on fuzzy logic is exposed, as this is a flexible method to be used in different installations with a variety of technology. The controller is supported on the Arduino Mega 2560 platform, in order to develop a low-cost system with its own technology, it is tested by computer simulation using the professional software Proteus v7.7, which guarantees that once validated the correct operation of the controller can be migrated to another system, say for example a PLC. The results obtained are shown and the simulations performed to the different blocks of the system are explained.
Ladattava julkaisu This is an electronic reprint of the original article. |  |
