A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä
Dry cleaning of InSb surfaces by hydrogen molecule exposure in ultrahigh vacuum
Tekijät: Jahanshah Rad, Zahra; Miettinen, Mikko; Punkkinen, Marko; Laukkanen, Pekka; Kokko, Kalevi
Kustantaja: Elsevier B.V.
Julkaisuvuosi: 2024
Journal: Applied Surface Science
Tietokannassa oleva lehden nimi: Applied Surface Science
Artikkelin numero: 161120
Vuosikerta: 678
eISSN: 1873-5584
DOI: https://doi.org/10.1016/j.apsusc.2024.161120
Verkko-osoite: https://doi.org/10.1016/j.apsusc.2024.161120
Rinnakkaistallenteen osoite: https://research.utu.fi/converis/portal/detail/Publication/457783470
Cleaning semiconductor surfaces by atomic hydrogen or hydrogen plasma has gained significant interest because such a dry-cleaning method enables to reduce consumption of chemicals and pure water, and to treat challenging surfaces of three-dimensional semiconductor nanostructures. We have studied effects of mere H2 molecule exposures on (111)B and (110) surfaces of InSb with native oxides in an ultrahigh-vacuum (UHV) chamber. Without any hydrogen cracking, exposure of native-oxide covered InSb(111)B, heated simultaneously at 350 °C, to H2 with a partial pressure of 5∙10−5 mbar decreases amount of surface oxides and carbon, according to x-ray photoelectron spectroscopy, and provides (2×2) low-energy electron diffraction (LEED) pattern. Scanning tunneling microscopy indicates that this InSb(111)B(2×2) surface contains still extra Sb. When the InSb temperature increases to 400 °C during the H2 exposure, LEED changes to (3×3) pattern, which is known to arise from a less Sb-rich surface compared to InSb(111)B(2×2). When InSb(111)B(3×3) is exposed to H2 at the lowered temperature of 300 °C, LEED changes back to (2×2), which is discussed to arise from that InSb(111)B(3×3) contains still oxygen. Experiments for InSb(110) support that the found H2 exposure effects apply to different crystal faces of InSb.
Ladattava julkaisu This is an electronic reprint of the original article. |  |
