A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä
Cluster Based Networks-on-Chip: An Efficient and Fault-Tolerant Architecture using Network Interface Assisted Routing
Tekijät: Khalid Latif, Amir-Mohammad Rahmani, Tiberiu Seceleanu, Hannu Tenhunen
Kustantaja: IGI-Global
Julkaisuvuosi: 2013
Journal: International Journal of Adaptive, Resilient and Autonomic Systems
Numero sarjassa: 3
Vuosikerta: 4
Numero: 3
ISSN: 1947-9220
Verkko-osoite: 10.4018/jaras.2013070102
Tiivistelmä
Partial Virtual channel Sharing (PVS) architecture has been proposed to enhance the performance of Networks-on-Chip (NoC) based systems. In this paper, the authors present an efficient and reliable Network Interface (NI) assisted routing strategy for NoC using PVS architecture. For this purpose, NoC system is divided into clusters. Each cluster is a group of two nodes comprising Processing Elements (PE), switches, links, etc. Each PE in a cluster can inject data to the network through a router, which is closer to the destination. This helps to reduce the network load by reducing the average hop count of the network. The proposed architecture can recover the PE disconnected from the network due to network level faults by allowing the PE to transmit and receive the packets through the other router in the cluster. 5x6 crossbar is used for the proposed architecture which requires one more 5x1 multiplexer without increasing the critical path delay of the router as compared to the 5x5 crossbar. The proposed router has been simulated for uniform, transpose and negative exponential distribution (NED) traffic patterns. The simulation results show the significant reduction in average packet latency at the expense of negligible area overhead.
Partial Virtual channel Sharing (PVS) architecture has been proposed to enhance the performance of Networks-on-Chip (NoC) based systems. In this paper, the authors present an efficient and reliable Network Interface (NI) assisted routing strategy for NoC using PVS architecture. For this purpose, NoC system is divided into clusters. Each cluster is a group of two nodes comprising Processing Elements (PE), switches, links, etc. Each PE in a cluster can inject data to the network through a router, which is closer to the destination. This helps to reduce the network load by reducing the average hop count of the network. The proposed architecture can recover the PE disconnected from the network due to network level faults by allowing the PE to transmit and receive the packets through the other router in the cluster. 5x6 crossbar is used for the proposed architecture which requires one more 5x1 multiplexer without increasing the critical path delay of the router as compared to the 5x5 crossbar. The proposed router has been simulated for uniform, transpose and negative exponential distribution (NED) traffic patterns. The simulation results show the significant reduction in average packet latency at the expense of negligible area overhead.
Turun yliopiston Tutkimustietojärjestelmän portaali