A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä

Directly Printable Frequency Signatured Chipless RFID Tag for IoT Applications




TekijätAnam H, Habib A, Jafri SI, Amin Y, Tenhunen H

KustantajaSPOLECNOST PRO RADIOELEKTRONICKE INZENYRSTVI

Julkaisuvuosi2017

JournalRadioengineering

Tietokannassa oleva lehden nimiRADIOENGINEERING

Lehden akronyymiRADIOENGINEERING

Vuosikerta26

Numero1

Aloitussivu139

Lopetussivu146

Sivujen määrä8

ISSN1210-2512

DOIhttps://doi.org/10.13164/re.2017.0139

Rinnakkaistallenteen osoitehttps://research.utu.fi/converis/portal/detail/Publication/24969879


Tiivistelmä
This paper proposes a low-cost, compact, flexible passive chipless RFID tag that has been designed and analyzed. The tag is a bowtie-shaped resonator based structure with 36 slots; where each patch is loaded with 18 slots. The tag is set in a way that each slot in a patch corresponds to a metal gap in the other patch. Hence there is no mutual interference, and high data capacity of 36 bits is achieved in such compact size. Each slot corresponds to a resonance frequency in the RCS curve, and each resonance corresponds to a bit. The tag has been realized for Taconic TLX-0, PET, and Kapton (R) HN (DuPont (TM)) substrates with copper, aluminum, and silver nanoparticlebased ink (Cabot CCI-300) as conducting materials. The tag exhibits flexibility and well optimized while remaining in a compact size. The proposed tag yields 36 bits in a tag dimension of 24.5. 25.5 mm(2). These 36 bits can tag 2(36) number of objects/items. The ultimate high capacity, compact size, flexible passive chipless RFID tag can be arrayed in various industrial and IoT-based applications.

Ladattava julkaisu

This is an electronic reprint of the original article.
This reprint may differ from the original in pagination and typographic detail. Please cite the original version.





Last updated on 2024-26-11 at 20:09