A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä
Application of Paper-Supported Printed Gold Electrodes for Impedimetric Immunosensor Development
Tekijät: Petri Ihalainen, Himadri Majumdar, Tapani Viitala, Björn Törngren, Tuomas Näreoja, Anni Määttänen, Jawad Sarfraz, Harri Härmä, Marjo Yliperttula, Ronald Österbacka, Jouko Peltonen
Kustantaja: MDPI AG (Basel, Switzerland)
Kustannuspaikka: (Basel, Switzerland)
Julkaisuvuosi: 2013
Journal: Biosensors
Lehden akronyymi: Biosensors
Artikkelin numero: 1-17
Numero sarjassa: 1
Vuosikerta: 3
Numero: 1
Aloitussivu: 1
Lopetussivu: 17
ISSN: 2079-6374
DOI: https://doi.org/10.3390/bios3010001
Tiivistelmä
In this article, we report on the formation and mode-of-operation of an affinity biosensor, where alternate layers of biotin/streptavidin/biotinylated-CRP-antigen/anti-CRP antibody are grown on printed gold electrodes on disposable paper-substrates. We have successfully demonstrated and detected the formation of consecutive layers of supra-molecular protein assembly using an electrical (impedimetric) technique. The formation process is also supplemented and verified using conventional surface plasmon resonance (SPR) measurements and surface sensitive characterization techniques, such as X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The article provides a possible biosensor development scheme, where—(1) fabrication of paper substrate (2) synthesis of gold nanoparticle inks (3) inkjet printing of gold electrodes on paper (4) formation of the biorecognition layers on the gold electrodes and (5) electrical (impedimetric) analysis of growth—all are coupled together to form a test-structure for a recyclable and inexpensive point-of-care diagnostic platform.
In this article, we report on the formation and mode-of-operation of an affinity biosensor, where alternate layers of biotin/streptavidin/biotinylated-CRP-antigen/anti-CRP antibody are grown on printed gold electrodes on disposable paper-substrates. We have successfully demonstrated and detected the formation of consecutive layers of supra-molecular protein assembly using an electrical (impedimetric) technique. The formation process is also supplemented and verified using conventional surface plasmon resonance (SPR) measurements and surface sensitive characterization techniques, such as X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The article provides a possible biosensor development scheme, where—(1) fabrication of paper substrate (2) synthesis of gold nanoparticle inks (3) inkjet printing of gold electrodes on paper (4) formation of the biorecognition layers on the gold electrodes and (5) electrical (impedimetric) analysis of growth—all are coupled together to form a test-structure for a recyclable and inexpensive point-of-care diagnostic platform.
Turun yliopiston Tutkimustietojärjestelmän portaali