A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä
Analysis of Unbalanced Magnetic Pull of a Solid Rotor Induction Motor in a Waste Heat Recovery Generator
Tekijät: Jastrzebski Rafal P, Pilat Adam K
Kustantaja: IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
Julkaisuvuosi: 2023
Journal: IEEE Transactions on Energy Conversion
Tietokannassa oleva lehden nimi: IEEE TRANSACTIONS ON ENERGY CONVERSION
Lehden akronyymi: IEEE T ENERGY CONVER
Vuosikerta: 38
Numero: 2
Aloitussivu: 1208
Lopetussivu: 1218
Sivujen määrä: 11
ISSN: 0885-8969
DOI: https://doi.org/10.1109/TEC.2022.3227551
Verkko-osoite: https://doi.org/10.1109/TEC.2022.3227551
Rinnakkaistallenteen osoite: https://research.utu.fi/converis/portal/detail/Publication/180401470
Preprintin osoite: https://preprints.jmir.org/preprint/35563
In active magnetic bearing control systems, the performance of the closed-loop control and the application can be impaired by external disturbances. This article analyzes the unbalanced magnetic pull forces produced by the eccentricity of a high-speed 1MW 3-phase solid rotor induction motor. The effect of unbalanced magnetic pull on a five-degree-of-freedom active magnetic bearing control and the resulting vibrations are studied. Finite-element-method-based modeling of the electrical machine unbalanced magnetic pull and activemagnetic bearing forces is carried out, and the results are used in the harmonic force analysis and modeling of an active magnetic bearing-rotor system. The overall engineering model comprising the rotor dynamics, unbalanced magnetic pull derived by the finite elementmethod, active magnetic bearing forces, and the controller is tested by time-stepping simulations. The simulations and experimental results are reviewed. The severity of the unbalanced magnetic pull and its effects on the robustness of the active magnetic bearing closed-loop system in a hermetic steam turbogenerator applied in marine waste heat recovery systems are evaluated.
Ladattava julkaisu This is an electronic reprint of the original article. |  |
