A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä

Development of Cylindrical Resonator for Millimeter-Wave Band ESR/NMR Double Magnetic Resonance




TekijätIshikawa, Yuya; Ohya, Kenta; Hirozawa, Kohei; Järvinen, Jarno; Vasiliev, Sergey; Fujii, Yutaka

KustantajaSpringer Nature

Julkaisuvuosi2025

Lehti: Applied Magnetic Resonance

Vuosikerta56

Aloitussivu1489

Lopetussivu1498

ISSN0937-9347

eISSN1613-7507

DOIhttps://doi.org/10.1007/s00723-025-01814-8

Julkaisun avoimuus kirjaamishetkelläAvoimesti saatavilla

Julkaisukanavan avoimuus Osittain avoin julkaisukanava

Verkko-osoitehttps://doi.org/10.1007/s00723-025-01814-8

Rinnakkaistallenteen osoitehttps://research.utu.fi/converis/portal/detail/Publication/505446809


Tiivistelmä

We have developed a magnetic resonance equipment for low temperature and high magnetic fields, aiming at Dynamic Nuclear Polarization-Nuclear Magnetic Resonance (DNP-NMR) and Electron-Nuclear DOuble Resonance (ENDOR) of diluted spin system using with electron spin resonance (ESR). In this study, we developed a cylindrical resonator with a submicron-thick gold film for millimeter-wave band ESR/NMR double magnetic resonance by exploiting the frequency dependence of the skin depth. ESR measurements were performed using the fabricated resonator at approximately 130 GHz and in the temperature range of 3–70 K of BDPA diluted to 100 mM in polystyrene. ESR sensitivity was obtained from the measurements. The 19F-NMR signal from the sample holder was also successfully observed.


Ladattava julkaisu

This is an electronic reprint of the original article.
This reprint may differ from the original in pagination and typographic detail. Please cite the original version.




Julkaisussa olevat rahoitustiedot
Open Access funding provided by University of Fukui.


Last updated on 2025-19-11 at 14:18