A4 Vertaisarvioitu artikkeli konferenssijulkaisussa
Effect of Laser Cleaning on EH36 Steel Surface Quality in Maritime Industry Applications
Tekijät: Tourunen, Eter; Väisänen, Inka; Iizuka, Olivia; Peuronen, Anssi; Kamboj, Nikhil; Piili, Heidi; Salminen, Antti
Toimittaja: Nadimpalli, Venkata Karthik; Mohanty, Sankhya; Jensen, Dorte Juul; Defer, Marion Caroline; Pan, Zhihao
Konferenssin vakiintunut nimi: Nordic Laser Materials Processing Conference
Kustantaja: IOP Publishing
Julkaisuvuosi: 2025
Lehti: IOP Conference Series: Materials Science and Engineering
Kokoomateoksen nimi: 20th Nordic Laser Materials Processing Conference
Artikkelin numero: 012020
Vuosikerta: 1332
ISSN: 1757-8981
eISSN: 1757-899X
DOI: https://doi.org/10.1088/1757-899X/1332/1/012020
Julkaisun avoimuus kirjaamishetkellä: Avoimesti saatavilla
Julkaisukanavan avoimuus : Kokonaan avoin julkaisukanava
Verkko-osoite: https://doi.org/10.1088/1757-899x/1332/1/012020
Rinnakkaistallenteen osoite: https://research.utu.fi/converis/portal/detail/Publication/505438442
This study examines the effect of laser cleaning on EH36 steel plates coated with epoxy paints. These materials are used in maritime applications, such as in shipbuilding. Paint layers were removed by using a laser beam generated by an IPG 100W pulsed nanosecond fiber laser with a wavelength of 1064 nm. The laser cleaning parameters included a pulse width of 25 ns, frequency of 100 kHz, and scanning speed of 450 mm/s. The tests were carried out using a laser power of 25 W, applying four or eight treatment cycles. Surface inspection was performed using a Bruker Alicona Infinite Focus G6 and a Malverna Panalytical Aeris X-ray diffractometer (XRD), along with visual evaluation. Results showed complete removal of paint layers, confirmed by visual inspection and XRD, with no damage to the base metal. Surface roughness values remained within acceptable limits for maritime industry standards. The mechanism of paint removal was identified as ablation, allowing layer -by-layer removal. This suggests that laser -cleaned surfaces can be directly repainted, avoiding time-consuming re -sandblasting. The study highlights the industrial importance of laser cleaning for efficient paint removal and maintenance in maritime applications.
Ladattava julkaisu This is an electronic reprint of the original article. |  |
Julkaisussa olevat rahoitustiedot:
The project is funded by the European Regional Development Fund (ERDF) and Satakuntaliitto.
