A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä
Calibration of RADMON radiation monitor onboard Aalto-1 CubeSat
Tekijät: Oleynik P, Vainio R, Punkkinen A, Dudnik O, Gieseler J, Hedman H, Hietala H, Hæggström E, Niemelä P, Peltonen J, Praks J, Punkkinen R, Säntti T, Valtonen E
Kustantaja: Elsevier Ltd
Julkaisuvuosi: 2020
Journal: Advances in Space Research
Tietokannassa oleva lehden nimi: Advances in Space Research
Vuosikerta: 66
Numero: 1
Aloitussivu: 42
Lopetussivu: 51
ISSN: 0273-1177
eISSN: 1879-1948
DOI: https://doi.org/10.1016/j.asr.2019.11.020
Verkko-osoite: https://www.sciencedirect.com/science/article/pii/S0273117719308282
Rinnakkaistallenteen osoite: https://research.utu.fi/converis/portal/detail/Publication/45026066
RADMON is a small radiation monitor designed and assembled by students of University of Turku and University of Helsinki. It is flown on-board Aalto-1, a 3-unit CubeSat in low Earth orbit at about 500 km altitude. The detector unit of the instrument consists of two detectors, a Si solid-state detector and a CsI(Tl) scintillator, and utilizes the ΔE-E technique to determine the total energy and species of each particle hitting the detector. We present the results of the on-ground and in-flight calibration campaigns of the instrument, as well as the characterization of its response through extensive simulations within the Geant4 framework. The overall energy calibration margin achieved is about 5%. The full instrument response to protons and electrons is presented and the issue of proton contamination of the electron channels is quantified and discussed.
Ladattava julkaisu This is an electronic reprint of the original article. |  |
