A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä
Dissolution and mineralization characterization of bioactive glass ceramic containing endodontic sealer Guttaflow Bioseal
Tekijät: Niko-Pekka Johannes Hoikkala, Xiaoju Wang, Leena Hupa, Jan-Henrik Smått, Jouko Peltonen, Pekka K. Vallittu
Kustantaja: Japanese Society for Dental Materials and Devices
Julkaisuvuosi: 2018
Journal: Dental Materials Journal
Tietokannassa oleva lehden nimi: Dental materials journal
Lehden akronyymi: Dent Mater J
Vuosikerta: 37
Numero: 6
Aloitussivu: 988
Lopetussivu: 994
Sivujen määrä: 7
ISSN: 0287-4547
eISSN: 1881-1361
DOI: https://doi.org/10.4012/dmj.2017-224
Tiivistelmä
Aim of the study was to evaluate apatite forming ability and ion dissolution of bioactive glass-ceramic (BGC) particles from novel polydimethylsiloxane (PDMS) based endodontic sealer Guttaflow Bioseal. Firstly, water sorption and solubility were determined for Guttaflow 2 and Guttaflow Bioseal (GB), the latter containing BGC filler particles. Mineral precipitations in simulated body fluid (SBF) were observed with SEM/EDX. Ion-release from the sealer was determined with inductively coupled plasma optical emission spectrometry (ICP-OES) in Tris-buffer solution. Change in pH was also measured. The obtained data was statistically analyzed with Tukey’s HSD test (p<0.05). GB exhibited significantly higher water sorption and solubility in comparison with Guttaflow 2. Surface structure exposed particles of BGC in the PDMS matrix. The BGC particles (size of 20–40 μm) indicated to consist of CaO-SiO2-Na2O-ZrO2-P2O5. Morphologically spherical Ca/P precipitation formed after 3 days in the SBF on the sealer surface. Ca/P ratio of the precipitation ranged in 1.20–1.65 indicating transformation to hydroxyapatite (HA). The pH of the immersion solution rose gradually.
Aim of the study was to evaluate apatite forming ability and ion dissolution of bioactive glass-ceramic (BGC) particles from novel polydimethylsiloxane (PDMS) based endodontic sealer Guttaflow Bioseal. Firstly, water sorption and solubility were determined for Guttaflow 2 and Guttaflow Bioseal (GB), the latter containing BGC filler particles. Mineral precipitations in simulated body fluid (SBF) were observed with SEM/EDX. Ion-release from the sealer was determined with inductively coupled plasma optical emission spectrometry (ICP-OES) in Tris-buffer solution. Change in pH was also measured. The obtained data was statistically analyzed with Tukey’s HSD test (p<0.05). GB exhibited significantly higher water sorption and solubility in comparison with Guttaflow 2. Surface structure exposed particles of BGC in the PDMS matrix. The BGC particles (size of 20–40 μm) indicated to consist of CaO-SiO2-Na2O-ZrO2-P2O5. Morphologically spherical Ca/P precipitation formed after 3 days in the SBF on the sealer surface. Ca/P ratio of the precipitation ranged in 1.20–1.65 indicating transformation to hydroxyapatite (HA). The pH of the immersion solution rose gradually.
Turun yliopiston Tutkimustietojärjestelmän portaali