Optimization of the BaCeO3 Concentration in YBCO Films Prepared by Pulsed Laser Deposition

: Irjala M, Huhtinen H, Jha R, Awana VPS, Paturi P

Publisher: IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC

: 2011

: IEEE Transactions on Applied Superconductivity

: IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY

: IEEE T APPL SUPERCON

: 3

: 21

: 3

: 2762

: 2766

: 5

: 1051-8223

DOI: https://doi.org/10.1109/TASC.2010.2102737

A series of studies has been carried out on thin films prepared by pulsed laser deposition (PLD) from micro-grained targets of YBa2Cu3O7-x (YBCO) to determine the effect of doping them with BaCeO3 (BCO) in concentrations between 0-10 wt%. BCO has been found to increase J(c) in e.g. melt-textured and bulk samples, but no systematic study with PLD thin films has been performed. Magnetometric measurements up to 8 T and down to 10 K as well as structural measurements with XRD and AFM were performed. J(c) increased with doping and the highest J(c)'s were achieved with low dopant levels (2% and 4%), which varied according to the external field and temperature. T-c decreased when the dopant concentration was increased, similarly as in BaZrO3 (BZO) doped films. However, the BCO growth process in the films was found to be different from the BZO and, furthermore, an interesting effect where the YBCO twin structure is altered was found around 6 wt% of BCO. The J(c) results and a comparison with structural properties with increasing dopant level and optimally BZO-doped YBCO thin films are presented.