A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä
Triboelectrification of paper in the offset printing process
Tekijät: Murtomaa M, Hokkanen T, Huhtala T, Tammi AL, Karkkainen J, Lehto VP
Kustantaja: ELSEVIER SCIENCE BV
Julkaisuvuosi: 2007
Lehti:: Journal of Electrostatics
Tietokannassa oleva lehden nimi: JOURNAL OF ELECTROSTATICS
Lehden akronyymi: J ELECTROSTAT
Vuosikerta: 65
Numero: 9
Aloitussivu: 593
Lopetussivu: 597
Sivujen määrä: 5
ISSN: 0304-3886
DOI: https://doi.org/10.1016/j.elstat.2007.01.002
Tiivistelmä
In offset printing, the printouts experience various complicated processes and operations before the final product is ready to be sent forward. In addition to the actual printing, these unit operations involve cutting, folding, stacking, labelling and various other operations which all include some kind of frictional contact either between the printed sheets themselves, or between the sheets and the machinery. In these contacts, charge exchange takes place which often leads to problems in the handling of lightweight prints. Machine speeds are ever increasing which has increased the importance of electrostatic problems. In this study, we present various measurements which have been performed on coating powders and coated papers both in a laboratory and in a pilot-scale facility. (C) 2007 Elsevier B.V. All rights reserved.
In offset printing, the printouts experience various complicated processes and operations before the final product is ready to be sent forward. In addition to the actual printing, these unit operations involve cutting, folding, stacking, labelling and various other operations which all include some kind of frictional contact either between the printed sheets themselves, or between the sheets and the machinery. In these contacts, charge exchange takes place which often leads to problems in the handling of lightweight prints. Machine speeds are ever increasing which has increased the importance of electrostatic problems. In this study, we present various measurements which have been performed on coating powders and coated papers both in a laboratory and in a pilot-scale facility. (C) 2007 Elsevier B.V. All rights reserved.
Turun yliopiston Tutkimustietojärjestelmän portaali