A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä
The Effect of Hydrofluoric Acid Etching Duration on the Surface Micromorphology, Roughness, and Wettability of Dental Ceramics
Tekijät: Ramakrishnaiah R, Alkheraif AA, Divakar DD, Matinlinna JP, Vallittu PK
Kustantaja: MDPI AG
Julkaisuvuosi: 2016
Journal: International Journal of Molecular Sciences
Tietokannassa oleva lehden nimi: INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
Lehden akronyymi: INT J MOL SCI
Artikkelin numero: ARTN 822
Vuosikerta: 17
Numero: 6
Sivujen määrä: 17
ISSN: 1422-0067
eISSN: 1422-0067
DOI: https://doi.org/10.3390/ijms17060822
The current laboratory study is evaluating the effect of hydrofluoric acid etching duration on the surface characteristics of five silica-based glass ceramics. Changes in the pore pattern, crystal structure, roughness, and wettability were compared and evaluated. Seventy-five rectangularly shaped specimens were cut from each material (IPS e-max (TM), Dentsply Celtra (TM), Vita Suprinity (TM), Vita mark II (TM), and Vita Suprinity FC (TM)); the sectioned samples were finished, polished, and ultrasonically cleaned. Specimens were randomly assigned into study groups: control (no etching) and four experimental groups (20, 40, 80 and 160 s of etching). The etched surfaces' microstructure including crystal structure, pore pattern, pore depth, and pore width was studied under a scanning electron microscope, and the surface roughness and wettability were analyzed using a non-contact surface profilometer and a contact angle measuring device, respectively. The results were statistically analyzed using one-way analysis of variance (ANOVA) and the post hoc Tukey's test. The results showed a significant change in the pore number, pore pattern, crystal structure, surface roughness, and wettability with increased etching duration. Etching for a short time resulted in small pores, and etching for longer times resulted in wider, irregular grooves. A significant increase in the surface roughness and wettability was observed with an increase in the etching duration. The findings also suggested a strong association between the surface roughness and wettability.
Ladattava julkaisu This is an electronic reprint of the original article. |  |
