A1 Refereed original research article in a scientific journal
Uniform size Y-Ba-Cu-O particles obtained by laser ablation and post-annealing
Authors: Paturi P, Huhtinen H, Laiho R, Raittila J
Publisher: IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
Publication year: 2001
Journal:: IEEE Transactions on Applied Superconductivity
Journal name in source: IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
Journal acronym: IEEE T APPL SUPERCON
Volume: 11
Issue: 1
First page : 3449
Last page: 3452
Number of pages: 4
ISSN: 1051-8223
DOI: https://doi.org/10.1109/77.919805
Abstract
Thermally induced motion and clustering of single particles obtained by pulsed laser deposition (PLD) from an YBa2Cu3O6+x target having nanosize grains is investigated. As shown by atomic force microscopy the as-deposited particles on SrTiO3 substrates have average height of 1 - 3 unit cells and width of 40 nm. When the substrate is post-annealed after deposition in oxygen at a temperature T-a < 400C no changes in the distribution and sizes of the particles are observed. For T-a > 400 degreesC the particles start to grow in height and simultaneously their surface density on the substrate decreases. Only when most of the particles have reached the height of 10 nm their width begins to grow, increasing continuously as T-a is risen up to 900 degreesC. The way of coalescence of the particles upon increasing T-c is compared with island growth models of thin films prepared by PLD. It is suggested that these particles could be used for manufacture of nanostructures fusing them together by thermal annealing.
Thermally induced motion and clustering of single particles obtained by pulsed laser deposition (PLD) from an YBa2Cu3O6+x target having nanosize grains is investigated. As shown by atomic force microscopy the as-deposited particles on SrTiO3 substrates have average height of 1 - 3 unit cells and width of 40 nm. When the substrate is post-annealed after deposition in oxygen at a temperature T-a < 400C no changes in the distribution and sizes of the particles are observed. For T-a > 400 degreesC the particles start to grow in height and simultaneously their surface density on the substrate decreases. Only when most of the particles have reached the height of 10 nm their width begins to grow, increasing continuously as T-a is risen up to 900 degreesC. The way of coalescence of the particles upon increasing T-c is compared with island growth models of thin films prepared by PLD. It is suggested that these particles could be used for manufacture of nanostructures fusing them together by thermal annealing.
UTU Research Portal