A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
Wheel rut measurements by forest machine-mounted LiDAR sensors - accuracy and potential for operational applications?




Julkaisun tekijät: Aura Salmivaara, Mikko Miettinen, Leena Finér, Samuli Launiainen, Heikki Korpunen, Sakari Tuominen, Jukka Heikkonen, Paavo Nevalainen, Matti Sirén, Jari Ala-Ilomäki, Jori Uusitalo
Kustantaja: TAYLOR & FRANCIS INC
Julkaisuvuosi: 2018
Journal: International Journal of Forest Engineering
Tietokannassa oleva lehden nimi: INTERNATIONAL JOURNAL OF FOREST ENGINEERING
Lehden akronyymi: INT J FOREST ENG
Volyymi: 29
Julkaisunumero: 1
Sivujen määrä: 12
ISSN: 1494-2119
eISSN: 1913-2220

Tiivistelmä
Soil rutting caused by forest operations has negative economic and ecological effects and thus limits for rutting are set by forest laws and sustainability criteria. Extensive data on rut depths are necessary for post-harvest quality control and development of models that link environmental conditions to rut formation. This study explored the use of a Light Detection and Ranging (LiDAR) sensor mounted on a forest harvester and forwarder to measure rut depths in real harvesting conditions in Southern Finland. LiDAR-derived rut depths were compared to manually measured rut depths. The results showed that at 10-20 m spatial resolution, the LiDAR method can provide unbiased estimates of rut depth with root mean square error (RMSE) < 3.5 cm compared to the manual rut depth measurements. The results suggest that a LiDAR sensor mounted on a forest vehicle can in future provide a viable method for the large-scale collection of rut depth data as part of normal forestry operations.

Ladattava julkaisu

This is an electronic reprint of the original article.
This reprint may differ from the original in pagination and typographic detail. Please cite the original version.




Last updated on 2019-29-01 at 15:09