A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä

Vacuum ultraviolet photon-mediated production of [F-18]F-2




TekijätKrzyczmonik A, Keller T, Kirjavainen AK, Forsback S, Solin O

KustantajaWILEY

Julkaisuvuosi2017

JournalJournal of Labelled Compounds and Radiopharmaceuticals

Tietokannassa oleva lehden nimiJOURNAL OF LABELLED COMPOUNDS & RADIOPHARMACEUTICALS

Lehden akronyymiJ LABELLED COMPD RAD

Vuosikerta60

Numero4

Aloitussivu186

Lopetussivu193

Sivujen määrä8

ISSN0362-4803

eISSN1099-1344

DOIhttps://doi.org/10.1002/jlcr.3489

Verkko-osoitehttp://onlinelibrary.wiley.com/doi/10.1002/jlcr.3489/epdf

Rinnakkaistallenteen osoitehttps://research.utu.fi/converis/portal/detail/Publication/22366543


Tiivistelmä
The chemistry of F-2 and its derivatives are amenable to facile aliphatic or aromatic substitution, as well as electrophilic addition. The main limitation in the use of [F-18]F-2 for radiopharmaceutical synthesis is the low specific activity achieved by the traditional methods of production. The highest specific activities, 55GBq/mol, for [F-18]F-2 have been achieved so far by using electrical discharge in the post-target production of [F-18]F-2 gas from [F-18]CH3F. We demonstrate that [F-18]F-2 is produced by illuminating a gas mixture of neon/F-2/[F-18]CH3F with vacuum ultraviolet photons generated by an excimer laser. We tested several illumination chambers and production conditions. The effects of the initial amount of [F-18]F-, amount of carrier F-2, and number of 193-nm laser pulses at constant power were evaluated regarding radiochemical yield and specific activity. The specific activity attained for [F-18]F-2-derived [F-18]NFSi was 10.3 +/- 0.9GBq/mol, and the average radiochemical yield over a wide range of conditions was 6.7% from [F-18]F-. The production can be improved by optimization of the synthesis device and procedures. The use of a commercially available excimer laser and the simplicity of the process can make this method relatively easy for adaptation in radiochemistry laboratories.

Ladattava julkaisu

This is an electronic reprint of the original article.
This reprint may differ from the original in pagination and typographic detail. Please cite the original version.





Last updated on 2024-26-11 at 18:58